IP config in Windows and Linux
IP config in Windows and Linux |
What we need to do
1 - Connecting Laptops with our cables
2 - Configuring TCP/IP Protocol in our Laptops
3 - Test the connection between the Laptops
Nework paln for ipconfig |
Configuring TCP/IP Protocol in Windows
Click Start
Click Control Panel
Click Network and Internet
Connections
Click Network Connections
What do we need to complete this practice?
We have successfully built our network cable
Now, we connect one side of cable to our laptop network card and other side
To the switch
Then, we must configure our computer to know how to communicate
with other computer in the network.
Configuring TCP/IP Protocol
Windows has installed a LAN connection
for your small network here
Configuring TCP/IP Protocol |
To verify your LAN connection, right-click your
connection, and then click Properties
lan or high-speed internet |
Example: 192.168.1.1
Note: Others should not give same
as this IP.
Now test network connection:
Click Start menu → Run
Type “cmd” in Run.
Then check network connection to other computer
With commad “ping”
Example: ping 192.168.1.2
Configuring TCP/IP Protocol In Ubuntu (Linux)
Configuring TCP/IP Protocol In Ubuntu (Linux) |
Editing Auto Ethernet
Editing Auto Ethernet |
No comments:
Post a Comment